Critical Environment

For permanent installations, our ceiling-mounted FFU offers the industry’s highest output of up to 1200 CFM.

The Portable Reverse Flow unit can be plugged into a standard electrical wall outlet and placed anywhere on the floor of the isolation room. It draws air in, then exhausts HEPA filtered air out through ductwork connected to a room exhaust, return grille, adjacent space or through a window. Openings for ductwork must be sealed to prevent leakage and maintain room pressurization. The unit features a push/pull handle and swivel casters for easy movement.

Our new in-line FFU is based on our proven Criti-Clean Ultra filtration technology that is used in hospital operating rooms and other critical environments across the country. Now, this new unit makes all the same valuable features of the Criti-Clean Ultra available to schools, office buildings and any other indoor environment where exceptional air quality […]

Our structural operating room ceiling system is designed and engineered to meet the increased demands of today’s surgical areas. This complete, heavy-duty system can accommodate a wide range of suspended equipment and include all necessary lighting. AJ Manufacturing will work with you to customize a design that delivers an efficient and seamlessly integrated operating room that meets your exact needs.

The SSLORS is a modular, customizable air distribution and lighting solution specifically engineered to provide the clean air and high-quality lighting needed to meet today’s operating room needs, while making the best use of the limited ceiling space often found in surgical areas.

THD-1500 Suspended Grid System is a customizable ceiling, lighting and air distribution system that’s specially designed and engineered for hospital surgical suites.

The SSEPD Series Perimeter Slot Diffusers are specially designed to provide an air curtain for operating rooms.

The SSLFHFD Series Laminar Flow HEPA Filter Diffuser utilizes the well-proven and time-tested concept of vertical air mass ‘laminar flow’ technology. The SSLFHFD Series produces a non-aspirating, low velocity, uniformly distributed downward moving ‘piston’ of conditioned air. The filters are designed to accomodate a Gel Seal HEPA or ULPA filter, which can be easily removed and replaced from the face of the unit. These high quality filters incorporate a separatorless 2″ (51) deep media, integral test port and an anodized aluminum gel seal frame.

The SSLFHFD MC Series Medium Capacity Laminar Flow HEPA Filter Diffuser utilizes the well-proven and time-tested concept of vertical air mass ‘laminar flow’ technology. The SSLFHFD Series produces a non-aspirating, low velocity, uniformly distributed downward moving ‘piston’ of conditioned air. The filters are designed to accomodate a Gel Seal HEPA or ULPA filter, which can be easily removed and replaced from the face of the unit. These high quality filters incorporate a separatorless 2″ (51) deep media, integral test port and an anodized aluminum gel seal frame.

SSLFHFD-T-HC High Capacity Laminar Flow HEPA Diffuser

Louvered Face HEPA Diffuser

The SSLF Series Laminar Flow Ceiling Diffusers utilize the well-proven and time-tested concept of vertical air mass ‘laminar flow’ technology. The SSLF Series produce a non-aspirating, low-velocity, uniformly distributed downward moving ‘piston’ of conditioned air.

The SSLF Series Medium Capacity Laminar Flow Ceiling Diffusers utilize the well-proven and time-tested concept of vertical air mass ‘laminar flow’ technology. The SSLF Series produce a non-aspirating, low-velocity, uniformly distributed downward moving ‘piston’ of conditioned air.

The SSLF-HC Series High Capacity Laminar Flow Ceiling Diffusers utilize the well-proven and time-tested concept of vertical air mass ‘laminar flow’ technology. The SSLF Series produce a non-aspirating, low-velocity, uniformly distributed downward moving ‘piston’ of conditioned air.

The SSLFHFD Series Laminar Flow HEPA Filter Diffuser with LED utilizes the well-proven and time-tested concept of vertical air mass ‘laminar flow’ technology, with the addition of an LED Alert Light which, when lit, indicates a change of filter is necessary for optimal performance. The SSLFHFD Series produces a non-aspirating, low velocity, uniformly distributed downward moving ‘piston’ of conditioned air. The filters are designed to accomodate a Gel Seal HEPA or ULPA filter, which can be easily removed and replaced from the face of the unit. These high quality filters incorporate a separatorless 2″ (51) deep media, integral test port and an anodized aluminum gel seal frame.

SSLF-N-2 Chamber Laminar Flow Diffuser

The FRD Model Flat Face Radial Pattern Diffusers have been designed to provide low aspiration at high ventilation rates, especially for clean room applications such as research laboratories, animal labs, food processing, hospital rooms and computer rooms. Specially designed internal baffles and a pressure plate produce an excellent radial air pattern that allows large volumes of air to be supplied at low level velocities. The unobtrusive flat face design provides the smooth appearance required for architectural excellence.

The FRD Model Flat Face Radial Pattern Diffuser with HEPA Filter has been designed to provide low aspiration at high ventilation rates, especially for clean room applications such as research laboratories, animal labs, food processing, hospital rooms and computer rooms. Specially designed internal baffles and a pressure plate produce an excellent radial air pattern that allows large volumes of air to be supplied at low level velocities. The unobtrusive flat face design provides the smooth appearance required for architectural excellence.

The HRDP Series Hinged Radial Pattern Diffuser has been designed to provide low aspiration and high ventilation rates especially for clean room applications such as research laboratories, animal labs, food processing, hospital rooms and computer rooms.

The HRDP Series Hinged Radial Pattern Diffuser with Filter is similar to the standard model, however, it incorporates an extended plenum and a unique frame designed to accomodate a Gel Seal HEPA or ULPA filter. These high quality filters can be easily removed and replaced from the face of the unit, and incorporate a separatorless 2″ deep media, integral test port and an anodized aluminum gel seal frame.

The SS Hemispherical Diffusers feature an adjustable pattern control technology for delivering high volumes of low velocity air in a radial pattern. Each model is constructed using adjustable blades which allow adjustment of the discharge air pattern. Two versions of this model are available: SS Hemispherical with an optional adjustable face and SS Hemispherical-PERF with a perforated center section. SS Hemispherical diffuser blades hang less that 1″ below the ceiling.

A-J Manufacturing provides the highest quality HEPA and ULPA Filters currently available as options in our stainless steel laminar flow and radial flow diffusers, or any combination grille, plaster frame, and plenum models in hinged or non-hinged models. Typical applications include hospitals, semiconductor manufacturing, disk drive and compact disk manufacturing, food processing, pharmaceutical production and aerospace manufacturing.